Noyafa Multi-Function Cable Tester with PoE Detection, Cable Length Measurement, Port Flashing, PING Testing & NCV Function NF-8506

Multi-Function Network Cable TesterPoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)Measure cable length accurately , the range is 200m.Two scan modes selectable: AC filter & Non AC filterTest physical status for STP, UTP lan cable.Hub blink for locating network port by the flashing port light on Hub / Switch.Ping & IP & Switch testing functionPing test:Check network connectivityP Scan:Scan out the IP addresses in use in the switchSwitch test:Identify the switch type 10M/100M/1000M and the duplex mode of the switch.Other functions:Detect AC voltage presence (50V-1000V).Lamp function assists use in dark corners. —TransmitterWiremap Cable type: CAT5,CAT6 (STP & UTP)Test with switch directly: YesMax range: 600mScanCable type: CAT5/CAT6 (STP & UTP)/RJ11/other metal wiresAC filter: YesMax range: 600mLengthCable type: CAT5, CAT6 (STP & UTP)Test range: 2~200mBreakage location: YesPOE testTest range: DC 5~60V standard / non-standard PoE switchVoltage display: YesPSE type: Mid-span/End-span/AT-4 pairsSwitch testLink speed: 10M/100M/1000M – Duplex Mode(Full/Half)Ping Scan function: YesIP Scan function: YesBattery: 3.7V lithium batteryDimensions (LxWxD): 150*75*35mmReceiverLamp: YesAC Voltage detecting: YesBattery type: 3.7V lithium batteryDimensions (LxWxD): 200*50*33mm     —