Wire mapping & Continuity test: Check Cat5 & Cat6 Cables status. Display length and exact faults like opens, splits, shorts, and crossings on an LCD screen.Cable trace: Adjustable signal strength indicator helps find cables from bundled cables, different rooms, walls, and ceilings. (300 meters/984 feet).Length test: Measure the length of CAT5/CAT5e/CAT6 cables up to 200 meters (656 feet). Help prepare the suitable cables for installation.Port flash: Sending signals through connected cables to flash ports on 10M/100M/1000M hubs, panels, routers, or switches. Sync frequency flashing on Port & LCD Screen.PoE test: Diagnose the PoE network by listing pins of the power supply, and other statuses like voltage, polarity, and PSE(af or at standard).Optical Power meter: Measure optical power and loss in single-mode optical fibers.Visual Fault Locator: Quickly navigate Fiber break points with visible red lights.RJ45 Head Test: Tell if RJ45 connectors are properly crimped.NCV: Non-contact voltage detector on Receiver levels up safety and reduces chances of damaging devices.—Cable type: CAT5/CAT6Voltage protection : 60VDetails of CONT function : Scan Frequency: 455KHzPort Flash: √Details of Length function: Accuracy: ≤20M /-1.6M, 20M~100M /-2.4M, >100M /-3.2MDetails of POE function: Standard/Non Standard – End connection /Middle jumper /Powered by 8 cores – PoE Power supplyNVL: 10MwOPM: 1310/1550/1625 (Single-mode Wavelength)Crimping: RJ45-8 Cores,Min length is 210cmPower supply: 3.7V 1500mAh Polymer lithium batteryCharge : Type-C connectorNCV: √Lamp: √Lower voltage warning: √—
