Opton 10G SFP Module SM SC/UPC 1270/1330nm 5km Pair

Opton 10G-SM-WDM-S5-KIT is a set consisting of two optical inserts designed for use with single-mode fiber. They are intended for transmission over a single optical fiber (WDM) and feature SC/UPC connectors. The connection is established using two channels – 1270 nm and 1330 nm – and the kit includes two different inserts, matched accordingly. The offered product consists of SFP modules with a maximum supported throughput of 10 Gb/s. The transmit power range is -8.2 ~ 0.5 dBm, and the receiver sensitivity is -14.4 dBm. The maximum transmission distance is 5 km. The inserts are factory-programmed for Cisco and should be compatible with all devices that do not block third-party modules.Upon request, we program optical modules for use with solutions from other manufacturers.SFP ModuleThe set consists of SFP fiber optic modules, supporting throughput of up to 10 Gb/s. This standard is widely used among many products available on the market. It offers ten times the speed of a standard SFP module or a 1G Ethernet port. It is ideal for connecting two locations or transmitting data between network devices, such as between two switches or between a router and a switch.Singlemode Fiber, Range up to 5 kmThe offered product is compatible with fiber optic cables equipped with singlemode fiber. This allows for long-range transmission. The modules feature an optical power output of -8.5 ~ 0.5 dBm and a receiver sensitivity of up to -14.4 dBm. The maximum connection range is 5 km. These modules are primarily suited for in-building connections but can also be successfully used over longer distances.SC/UPC ConnectorThe modules use standard SC/UPC-type connectors.WDM (BIDI) Modules The modules transmit data using a single optical fiber by utilizing two different wavelengths – 1270 nm and 1330 nm. This is especially useful in locations where fiber availability is limited or when leasing fiber lines. When purchasing the set, you will receive a matched pair of modules. The SFP modules are configured to establish a single bi-directional transmission link.Wide CompatibilityOpton SFP modules are factory-programmed for Cisco but are compatible with devices from all manufacturers that do not block third-party transceivers. These include, for example: MikroTik, Ubiquiti, TP-Link, D-Link, and Planet. For systems where the manufacturer enforces a third-party module lock (e.g., HP, Extreme Networks, Aruba), we offer custom programming of the SFP modules by our service department. If you have any doubts before purchasing, feel free to contact us.—Form factor: SFP Throughput: 10 Gb/sWavelength: Tx: 1270 nm -Rx: 1330 nmMaximum range" 5 kmConnector" SC/UPCMedia: SinglemodeTransmitter type: DFBReceiver type" PINTX Power: -8,2 ~ 0,5 dBmReceiver sensitivity: < -14,4 dBmPower budget: 6,2 dBReceiver overload: 0,5 dBmTypical power consumption: < 1 WExtinction ratio: > 3,5 dBDDM/DOM YesOperating temperature: 0°C to 70°C—